1. Technology Services
2. askIT
3. Knowledge Base
4. Telecommunications
5. I Want To...
6. Program a One Touch Dial Key on an ISDN Telephone

Program a One Touch Dial Key on an ISDN Telephone

ISDN 1050

1. Press REG (softkey) 4 of the buttons directly below the display screen)
   • Press [1] on the keypad
   • Press ENTER (softkey 1 of the buttons directly below the display screen)
2. Press the One-Touch Message Speed Dial key or any of the available multifunction buttons that are not programmed as telephone lines.
3. Dial [9] + the NUMS access number 1-877-584-9321 or any other number you want to program. Remember to include [9] if programming an off-campus number.
4. Press ENTER (Softkey 1 of the buttons directly below the display screen). COMPLETED appears on the display
5. To exit, press REG (softkey 4)

ISDN 970

Comes in Black or White

This set has 5 one-touch memory locations.

1. To assign a one-touch memory button, press [MENU].
   • Press the softkey below MEM.
   • Press the softkey below 1TOUCH.
   • Press the softkey below PROGRAM. The following display appears:
     Enter phone #:
     _
     
     PAUSE QUIT
2. Enter [9] + the NUMS access number 1-877-584-9321 or any other number you want to program. Remember to include [9] if programming an off-campus number.
3. Press the softkey below DONE when you are finished.
4. Press a memory key to store this number.
   • Remember, the memory keys are the bottom three keys plus the [LOWER] key.
   • The keys are numbered M1, M2, and M3.
     •  Each key has two positions: press [LOWER] to access the lower position.
     • [REDIAL] occupies the upper M1 position.
5. You can write with a pen or pencil on the top of the plastic cover that surrounds the keys to remember the autodial destination.
   
   

This article was updated: 04/16/2020